1140840
  • Home
  • Amazon
  • DROK Volt Amp Meter, AC 500V 100A Digital Voltmeter Ammeter Panel, 0.3
DROK Volt Amp Meter, AC 500V 100A Digital Voltmeter Ammeter Panel, 0.39 Inches LED 2in1 Multimeter, 2-Wire Voltage Amperage Tester Gauge with Current Transformer

DROK Volt Amp Meter, AC 500V 100A Digital Voltmeter Ammeter Panel, 0.39 Inches LED 2in1 Multimeter, 2-Wire Voltage Amperage Tester Gauge with Current Transformer

Product Code(SKU): S0O717CS6Z

Product weight: 0.50 Pounds

Brand: DROK

Price: $15.99 (Not Confirm)

product description:

  • 【7 Modes Display Monitor】 DROK USB Tester is equipped with digital color LED display screen, which can be switched between 7 display modes. This multimeter can be used to measure voltage, current, power, capacity. Through the 7 modes, you can clearly see the voltage, current, capacity and power during charging. Only 1 button to switch the display mode, simple and handy.
  • 【Dual USB Output】 This item is equipped with USB-A USB-C input and dual USB 2.0 output. The output ports support PD QC 3.0 fast charge protocol. This meter can auto identify the fast charge protocol, which can charge your device among 3.6V to 12V 3A. Output Ⅰ can be used for device charging and data transfer, and output Ⅱ can only be used for charging.
  • 【Multifunction】 DROK USB detector can be used for capacity checking, capacity clear, over voltage, under voltage, over current and short circuit alarm, which is easy to test the power, quality and know the health condition of your device chargers or USB cables.
  • 【Easy to Use】 The multimeter only has Two button. Once you plug in the meter, you can test the parameter you want. The button Ⅱ can switch 7 modes display——VA(Voltage & Current), C(Capacity), P(Power), VA+C, VA+P, C+P, VA+C+P. When voltage ≥ 5V, power on and long press button Ⅰ for 5 seconds to activate output.
  • 【Application】 DROK USB Meter can be used for the devices between 3.2-30V and 0-5A. You can use this for 5V 9V 12V 24V 30V solar panel, power bank, battery charger, USB able.【Note】If you use USB-C IN and USB-A OUT, long press button I to Start Output.
  • 【Volt Amp Adjustment】 Input Voltage can be 110V or 220V. Wide adjustable output Voltage range: DC 0-48V. This supply is suitable for 5V 9V 12V 24V 30V 36V 48Vdevices. The voltage precision is 0.1V. Note——The maximum current is 10A. But the ouput current can be adjusted by the potentiometer. No matter how many voltage is adjusted, the max current should not be higher than 10A. It can be used to device of 2A 3A 5A 10A. Make sure to use the devices which is below 10A.
  • 【Hareware】 This Buck Converter is equipped with LED screen, heat sink and cooling fan. The LED screen can clearly display the output voltage and output current. Heat sink and cooling fan can control the temperature in a safe range. During the running power is high, the cooling fan will automatically activate with little noise.
  • 【Easy Operation】 This supply is no need to install, after connecting wire, it can be used to adjust output, which is convenient. The potentiometer is inset into the supply. Only to rotate the potentiometer can adjust output parameter.
  • 【Protection】 Over Load Protection, Over Voltage Protection, Short Circuit Protection, which can protect your device from damage. Note: the default input voltage is 220V, before using, please switching the input voltage to 110V/220V according to your city voltage.
  • 【Wide Application】 This power supply has variable application. It can be used as a 5V 12V 24V 30V 36V 48V power supply for RV, Car, Labtop, Computer, Lab, CCTV, etc. All of our item has 1 year long time warranty guarantee.
  • Come with protective shell, Large LCD screen, blue background and white digit, can be clearly seen in any angle, displaying voltage and current simultaneously.
  • A constant voltage and current module, Input voltage could be 6-32V; Output voltage could be 1.25~32V; input side must be 1.5 higher than output side; max output Power is 75W.
  • Made of imported MP2304 chip, high conversion efficiency of 96%, when current is higher than 3A or 35W, please enhance heat dissipation.
  • With voltage-calibration and current-calibration, designed with USB interface, it brings you many conveniences in most occasions.
  • Wide applications:used as an ordinary step-down modules with over-current protection capabilities, as a battery charger, as a constant current LED driver module.
  • DROK buck converter input voltage range is DC 8V-22V; adjustable output voltage range is DC 1V-15V, please ensure input voltage is at least 3V higher than output voltage; max output current is 3A, if for long-term work, 2A doesn't need to enhance heat dissipation.
  • Potentiometer: the volt transformer is with potentiometer on the bottom, which allows you adjust the accuracy with the mini screw, but ensures you won't easily change its setting when mounted.
  • Safe Protection: our 5v dc converter is with reversed-connection protection, over-current protection, over-heating protection and over-voltage protection, hence it is safe to use.
  • Application: the stepdown regulator module is perfect for electronic hobby project, wide application, you can use it on radio, car audio, LED display, motor, Cell phone, etc.
  • Features: the dc-dc converter is fully sealed, outer enclosure acts as a heat sink, specially Made to be waterproof, anti-shock, anti-humidity and dust-proof, more durable.
  • DROK electronic thermostat controller power supply is DC 6-30V or 5V micro USB; control load current is 10A (Max); test temperature is -50~110℃; sensor length is 0.5 meter.
  • High current: Our digital temperature control board adopts high density PC board installation technology, the switch capacity can be up to 10A in spite of the small size.
  • LCD display: Designed with bright LCD display, people can check the temperature clearly from any angle.
  • User-friendly functions: The thermostat module has the function of real-time temperature reporting, temperature correction function, high-temperature alarm, emergency stop function and support UART Set, which make the module reliable and easy to use.
  • Applications: With waterproof temperature sensor probe, it can be widely used for domestic appliance, office machine, audio, equipment, automobile, etc. (Remote control TV receiver, monitor display, Audio,Raspberry Pi equipment high rushing current use application)
  • Measuring range -- DROK voltmeter ammeter voltage range is AC 60-500V, current range is 0-100A.
  • Clear color display -- the multimeter can clearly display voltage and current at the same time, red for voltage, green for current.
  • With precise CT -- DROK volt amperage meter is equipped with CT, no need to buy another. Can be installed on anywhere flexibly.
  • Simple connection -- the voltage ampere monitor gauge is powered by the circuit being measured, no need to connect extra power source.
  • Special design -- DROK volts amp tester is designed with built-in trimmer potentiometer, enable you to calibrate the meter easily. Back cover made it more safer to be used.
  • personal Info
    Disclosure of Affiliate Relationships
    • buynorthbest.com participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Since 2022, our goal has been to provide value to our visitors by carefully curating and recommending bestselling and interesting products. While we may earn a small commission from qualifying purchases made through affiliate links, this comes at no additional cost to you. Your support helps us continue offering high-quality content and product recommendations.
    • We are assuming you have read our terms and conditions and agreed with them.

    Famous Brands 2025:

    Was this product Helpful?