BuyNorthBest Logo
BuyNorthBest Logo
464363
Eastwood EAS21145 Contour SCT

Eastwood EAS21145 Contour SCT

Product Code(SKU): S07J6UUZSJ

Product weight: 0.50 Pounds

Brand: Eastwood

Price: $185.15 (Not Confirm)

order now

product description:

  • RUST ENCAPSULATOR: Iron oxide is no match for our original Eastwood Rust Encapsulator in a flat black finish. This aerosol paint-over-rust solution quickly stops surface rust before it can compromise the part’s structural integrity. Rust Encapsulator penetrates deep into the metal to prevent existing rust from spreading or future rust from forming. It’s also heat-resistant up to 400 degrees, which means it can be safely used in the engine bay or near the brakes.
  • HOW TO USE: Use a wire brush to remove loose rust, scale and paint. Remove dust, grease, oil deposits. Shake can for at least 2 mins after mixing ball starts to rattle. Feather surrounding paint with 220grit sandpaper. Apply the rust encapsulator can 10-12" from surface. Single coats dry to the touch in 20 min and are thoroughly dry in 3-4 hours at 68 degrees F. For greater durability a second coat can be applied one hour after the first. Allow 6-8 hours after last coat before applying top coat.
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support.
  • SAFETY INFORMATION: Always wear eye, skin and respiratory protection when applying this product.Use in a well ventilated area away from open flame. Store spray in a cool dry place. Warning: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
  • WARRANTY: Comes with a 90-day limited warranty and 90-day return.
  • RUST ENCAPSULATOR: Iron oxide is no match for our original Eastwood Rust Encapsulator Platinum. Developed to be brush, roller or spray applied, this coating is the right foundation and protection of any rusted substrate ; Rust Encapsulator Platinum penetrates deep into the metal to prevent existing rust from spreading or future rust from forming.
  • ADVANCED HIGH-TECH FORMULATION to be applied outdoors at high dew points and temperatures down to 40° F or as high as 80° F with minimal surface preparation; passed over 1,500 hours of salt spray testing, tenacious bond permanently fuses to both bare, clean steel and corrosion; can be applied directly over surface rust, can be top-coated with any high quality paint system; UV resistant aluminum pigmented finish
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support.
  • SAFETY INFORMATION: Always wear eye, skin and respiratory protection when applying this product.Use in a well ventilated area away from open flame. Store spray in a cool dry place. Warning: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
  • WARRANTY: 100% Satisfaction Guarantee Since 1978. We stand behind our solutions and customers. Comes with a 90-day limited warranty and 90-day return.
  • FRAME COATING: This special aerosol spray is both a rust prevention and rust destroyer formula rolled into one. It will not only protect your chassis from the start of rust formation and allow you to maintain a clean finish, it also eliminates the need for any future maintenance or repairs, ensuring that it will be as good as new for years to come.
  • HOW TO USE: Shake the can vigorously for at least 1 minute before and occasionally during use. Insert extension tube into spray nozzle then insert extension nozzle into frame openings, bolt holes, etc.Depress spray button and apply coating while pulling the extension nozzle back from the opening. Continue in all areas you can for complete coverage.
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support.
  • SAFETY INFORMATION: Always wear eye, skin and respiratory protection when applying this product.Use in a well ventilated area away from open flame. Store spray in a cool dry place. Warning: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
  • WARRANTY: Comes with a 90-day limited warranty and 90-day return.
  • Stop Rust In Its Tracks! Rust Remover Is The Easiest Way To Stop And Prevent Rust And Corrosion From Spreading
  • Great Primer For Floor Pans And Other Under-body Parts. Fills Tiny Pin-Holes And Surface Irregularities
  • Penetrates Deeper To Prevent Rust From Spreading Or Forming, Even In Hard-To-Reach Areas
  • UV Resistance,Heat Resistant To 400F And Has 2%-10% Gloss Level
  • 2k CLEAR COAT: Our special aerosol spray is a high-gloss clear coat spray that provides maximum shine. It will not only protect the sprayed surface from minor scratches but also allows it to maintain a clean a finish, that ensures the surface will look as good as new for years to come.
  • HOW TO USE: Use 1-2 spray passes with 50% overlap. Approx. 1.2-mil per spray pass. Allow 3-7 minutes flash between coats depending on temperature. Then fully cure in 12 hours at 68 degrees Fahrenheit, 35-40 minutes at 140 degrees Fahrenheit (IR drying). Pot Life: Approximately 48 hours after button is pushed and can is activated.
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support.
  • SAFETY INFORMATION: Always wear eye, skin and respiratory protection when applying this product.Use in a well ventilated area away from open flame. Store spray in a cool dry place. Warning: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
  • WARRANTY: Comes with a 90-day limited warranty and 90-day return.
  • SURFACE CONDITIONING TOOL: The Eastwood Contour SCT is a heavy-duty professional quality tool ruggedly designed for many years of reliable service. Ready for surface conditioning or any paint or rust stripping project, it features a drum guard enclosure and a rigidly mounted "D" handle for maximum safety. A high-torque, ball bearing supported motor and hardened spur gears provide smooth operation and long life. Speed is easily controlled via a 6 position rotary knob and ON/OFF trigger control.
  • HOW TO USE: Set desired motor speed by rotating the Speed Knob located on the top surface of the Motor Housing. While holding the Contour SCT securely in two hands, depress the On-Off switch with forefinger. To lock the On-Off switch in the ON position, depress the On-Off switch then push in the Lock Button located above the switch on the left side of the Handle. Keep the broad work surface of the Drum parallel to the work surface. Always use two hands while operating tool.
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support.
  • SAFETY INFORMATION: Read all instructions. Failure to follow all instructions listed in the manual may result in electric shock,fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
  • SATISFACTION GUARANTEED: We stand behind our products with confidence. Our commitment to excellence ensures that your product is covered against defects. If you have any questions, please feel free to contact us, and our support team will provide answers within 24 hours.
    • personal Info
    Disclosure of Affiliate Relationships
    • buynorthbest.com participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Since 2022, our goal has been to provide value to our visitors by carefully curating and recommending bestselling and interesting products. While we may earn a small commission from qualifying purchases made through affiliate links, this comes at no additional cost to you. Your support helps us continue offering high-quality content and product recommendations.
    • We are assuming you have read our terms and conditions and agreed with them.

    Famous Brands 2025:

    Was this product Helpful?

    Yes No