Product Code(SKU): S07792SCQ8
Product weight: 0.40 Pounds
Brand: FullFunRC
Input
Lipo 2S Capacity≤3500mA/20C
Ni-MH 5-6 cells Capacity≤3500mA/20C
Output
Continuous current: 45A/8.2V
Peak current: 350A/8.2V, ≤10ms
BEC output current: 2A/5.6V
BEC input current: ≤3A/5.6V
Brushed Motor compatible
540 size motor ＞ 12T
550 size motor ＞ 12T
Other size motor＞ 12T or RPM＜30000@7.2V
Model compatible: ≤1/10 scale touring car, buggy, short course truck, monster truck, crawler
Cutoff Function
Voltage cutoff: a. 2S Lipo: cutoff ≤6.6V, or＞10.5V; b.Ni-MH: cutoff ≤4.5V
Overheat cutoff: cutoff ＞100℃, resume ＜85℃
Mode: Practise Mode and Crawling Mode for choosing
ESC Instruction
Throttle Setup:
Switch on the transmitter first, and then the ESC, put the throttle trigger on a neutral position, wait for self-detection of ESC and automatic throttle correction(about three seconds). After the self-detection done, you will hear four different tone of Doo sound and the ESC is ready to use.
Mode Setup:
Practise Mode - Switch on the ESC first and press the setup button, release when you hear doo sound.
Crawler Mode - Switch on the ESC first and press the setup button, release when you hear doo doo sound.
Battery Setup
Ni-MH Battery: When using Ni-MH battery, press the setup button first and switch on the ESC, release when you hear doo sound.
Lipo Battery: When using Lipo battery, press the setup button first and switch on the ESC, release when you hear doo doo sound.
