product description:
How to Use: 1. Turn on the brake fluid tester by pressing the button on top. A green light should light up. If the light does not come on, it may be time to change a battery
2. Unscrew the lid for the brake fluid reservoir, and take off the cap for the brake fluid tester
3. Dip the test probes into the brake fluid and the LED lights will indicate the percentage of water in the brake fluid
4. After testing, remember to screw the lid of the brake fluid reservoir back on tightly
5. The tester will automatically power off after 12 seconds of inactivity
What to Do: The LED lights will indicate the percentage of water in the brake fluid: - Green: No water
- Green/Yellow: Less than 1% of water
- Green /Yellow/Yellow: Approx.2% of water
- Green/Yellow/Yellow/Red: Approx.3% (Brake fluid should be changed)
-Green/Yellow/Yellow/Red/Red: Approx.4% (Brake fluid must be changed urgently!)
Please Note: The ITEQ brake fluid tester is calibrated for DOT4 and DOT3 brake fluids, and DOT4 is used in most cars produced since 2006
Replace the battery if the green LED indicator no longer lights up after you press the button
Wash the test probe with tap water after every use
In case of skin contact with brake fluid, thoroughly wash the affected skin or clothing with water
Do not expose brake fluid to the atmosphere for a long time as it is highly hygroscopic
Package： 1 x brake fluid tester(Battery Not Included)
buynorthbest.com's Advice
• Before ordering any product, please make sure the product technically fulfills your need and contains no illegal ingredients (e.g., wine, alcohol, pig, pork, animal-based gelatin, etc.) or contents.
• We are assuming you have read our
terms and conditions and agreed with them.
Famous Brands 2025:
Was this product Helpful?
