BuyNorthBest Logo
BuyNorthBest Logo
440595
  • Home
  • Amazon
  • JL Safety Indestructible Toll Pass Holder with Largest Suction Cup for
JL Safety Indestructible Toll Pass Holder with Largest Suction Cup for EZ-Pass, I Pass, FasTrak, SunPass & SunPass Pro, Uni, NC QuickPass, EPass Xtra, 91 Express Lanes & More - Made in USA

JL Safety Indestructible Toll Pass Holder with Largest Suction Cup for EZ-Pass, I Pass, FasTrak, SunPass & SunPass Pro, Uni, NC QuickPass, EPass Xtra, 91 Express Lanes & More - Made in USA

Product Code(SKU): S0QFCUA53S

Product weight: 0.09 Pounds

Brand: JL Safety

Price: $12.98

order now

product description:

  • Eliminates the need to remove the hook from one rearview mirror to another when changing cars.
  • Polarized to work on all Mirortag models.
  • Only transfer the handicapped tag holder between cars
  • Tough clear sturdy plastic guaranteed to resist hot and cold conditions. Will NOT bend, melt or break
  • Install in seconds. Mirror post size: 1 inch maximum. made in USA
  • GOODBYE HANGING AND REMOVING: No more struggling to hang & remove the tag to/from rearview mirror every time you park and drive. No need to flip and rotate visors, or fish for mirror post. Simply point the back of the blue header to the back of the rearview mirror where hook is installed, and the holder and hook will magnetically attach to display your parking permit when parked, and pull it down to remove before driving for safe driving sight and to avoid fines and violations.
  • CONVENIENT AND PAIN FREE: Eliminates the pain & frustration to hang and remove the tag from the rearview mirror every time you park and drive. Most disabled drivers have pain in their necks, backs, shoulders and arms, making it painful to reach for the mirror post to hang and remove the permit, so they leave it hanging exposing themselves to unsafe driving sight and potential fines as it is illegal in most states to drive with placard hanging from the mirror. Mirortag is the answer and solution.
  • DETACHABLE HOOK: Hook and Holder are Magnetically attached. Install hook on your rearview mirror post once. Attach Mirortag holder with your handicap parking placard in it to the hook when parked, and gently pull it down to detach before driving. No need to remove the hook that is made from UV and sun resistant material.
  • EASY TO TRANSFER BETWEEN VEHICLES: It is easy to transfer to another vehicle if needed. Simply pull the Mirortag holder down from one hook of car1 to detach it, and attach it to hook in car2. Extra Mirortag hooks are available for multicar users.
  • AESTHETICALLY APPEALING & QUALITY: Your car & placard deserve a reliable holder with a sleek look. Unlike cheap hangers, Mirortag is engineered with an appealing look and quality hook you and your car deserve. Designed by a handicap placard user, and made in USA.
  • Placard size accepted: 4" W by 10" L. Rearview mirror post: 1 inch maximum (look for Mirortag Charm for bigger size). One holder and one hook included.
  • Tough, Sturdy, Compact & Sleek. Easily hidden behind mirror
  • Will not rattle, spin, warp, discolor or melt. Easy to install & remove
  • Easy access to EZPass Flex & HOV switch model
  • Dual suction cups for stability, and 2 adhesive strips already installed
  • Fits all EZ Pass, I Pass, iZoom, PalPass models
  • Eliminates the need to hang and remove the tag from the rearview mirror every time you park and drive.
  • No losing or misplacing the permit ever. Always under your visor.
  • Protects and preserves the condition of your parking placard permit
  • Tough sturdy plastic made from material guaranteed to resist hot and cold conditions
  • Easy to transfer to another vehicle if needed. Simply pull it off one visor and clip it onto another. Store registration inside holder
  • Eliminates the pain & frustration to hang and remove the tag from the rearview mirror every time you park and drive.
  • No need to look for mirror post, snap your tag on with your eyes closed.
  • Placard size: 4.125" W, 10" L. Mirror post: ALL sizes
  • Tough sturdy Magnet Charm. Will NOT melt or break
  • Easy to transfer to another vehicle if needed. Holder only, placard is not included. Made in USA
  • Slip-fit that tightly and gently holds your old or new transponder in place
  • Made from steel to handle extreme temperatures. Will never melt, break, or deform
  • Industrial grade suction cup that holds through the hot and cold conditions
  • Easily install and remove your transponder when needed. No adhesive needed.
  • Unlike other holders, it will not spin, rattle, discolor, deform, or bend
  • Eliminates the pain & frustration to hang and remove the tag from the rearview mirror every time you park and drive.
  • No need to look for mirror post, snap it on with your eyes closed. Fits all Mirorr posts regardless of size.
  • Protects and preserves the condition of your parking placard permit.
  • Tough sturdy Magnet Charm guaranteed to resist hot and cold conditions. Will NOT bend, melt or break
  • Tag size: 4.125" W by 10" L. Easy to transfer to another vehicle if needed. Store registration inside holder
  • Eliminates the need to hang and remove the tag from the rearview mirror every time you park and drive.
  • No losing or misplacing the permit ever. Always stored under your visor.
  • Protects and preserves the condition of your parking placard permit because you never touch the tag again.
  • Tough sturdy plastic made from material guaranteed to resist hot and cold conditions, not like the cheap flimsy ones that melt, bend, break, and damage your tag.
  • Easy to transfer to another vehicle if needed. Simply pull it off one visor, and slip it onto another. No permanent installation. Holder only, placard is not included
  • GOODBYE HANGING AND REMOVING: No more struggling to hang & remove the tag from rearview mirror every time you park and drive. No need to flip and rotate visors, or fish for mirror post. It’s right at your fingertips, simply swing it down to display, and up to fold away.
  • NO MORE DIGGING & SEARCHING: No more losing or misplacing the permit ever. Always under your passenger visor, at your fingertips.
  • TRIPLE-DIGIT TEMPERATURE RATED: Unlike soft Vinyl and PVC hangers that melt and curl and cracks in the sun, Visortag is 3-digit temperature rated plastic to withstand hottest states summer heat. It will protect and preserve the condition of your parking placard permit.
  • NO MORE BMV/DMV VISITS: Visortag protects and preserves your tag and keeps it as good as new. No more visits to BMV and DMV to replace your damaged tag. Visortag is made from tough sturdy plastic material guaranteed to resist hot and cold conditions, and protect your placard from dents, bends, scratches and curling, and will not melt your tag and its texts as Vinyl and PVC holders do.
  • SUPER CONVENIENT: Your handicap placard is well protected, conveniently stored, swing it down to display & up to put away. Always at your fingertips.
  • EASY TO TRANSFER BETWEEN VEHICLES: It is easy to transfer to another vehicle if needed. Simply pull it off one visor and clip it onto another.
  • AESTHETICALLY APPEALING: Your car & placard deserve a reliable holder with a sleek look. Visortag is engineered with an appealing look, and round corners for safe touch.
  • VISORTAG IS THE SOLUTION: Visortag is the solution for the many rearview mirrors that do not allow items to hang from them.
  • MADE IN USA: Unlike most soft hangers, Visortag is designed, patented, and proudly made in USA.
  • DIMENSIONS: Placard size: 9.30 inches long, 3.625 inches wide. Wider tag may be used since sides are open and can extend through. Handicap tag is not included.
  • ONE HOLDER FITS ALL - Compatible with old and new EZ-Pass, I-Pass, FasTrak, SunPass, SunPass PRO, Uni, NC QuickPass, E-Pass Xtra, 91 Express Lanes, and more. For full compatibility details, please check all photos.
  • INDESTRUCTIBLE - Made of steel. This holder resists melting, warping, discoloration, and breakage, unlike plastic alternatives. Built to endure intense sunlight and extreme weather, it ensures your toll pass remains secure and protected all year round.
  • UNINTERRUPTED READABILITY - Engineered to ensure no interference with antenna signal reception and emission, regardless of mounting position, this holder guarantees continuous toll tag readability, delivering seamless and reliable performance at toll booths.
  • LARGEST SUCTION CUP - Equipped with the largest industrial-grade suction cup on the market, this holder features patented rings designed to diffuse light and prevent the convergence of sunlight at a focal point, protecting your toll tag and car interior from potential damage.
  • SAFETY - Our thoughtful design places the suction cup behind the toll pass, eliminating the distance needed for the sun's light to create a focal point that could damage your car interior or pose a fire hazard, ensuring maximum safety for your vehicle.
  • EASY TO TRANSFER - Easily transfer your transponder by pulling the suction cup tab and installing it in another vehicle as needed.
  • TRUST THE MAKER - Since 2007, JL Safety has been the leading manufacturer of toll pass holders. Choose us with confidence, knowing we take pride in offering the highest quality holders, designed, patented, and made in the USA.
  • WARRENTY - Lifetime
    • personal Info
    Disclosure of Affiliate Relationships
    • buynorthbest.com participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Since 2022, our goal has been to provide value to our visitors by carefully curating and recommending bestselling and interesting products. While we may earn a small commission from qualifying purchases made through affiliate links, this comes at no additional cost to you. Your support helps us continue offering high-quality content and product recommendations.
    • We are assuming you have read our terms and conditions and agreed with them.

    Famous Brands 2025:

    Was this product Helpful?

    Yes No