BuyNorthBest Logo
BuyNorthBest Logo
430210
  • Home
  • Amazon
  • MENSI Electronic Push Button Pluse Igniter & Wire 500mm for Uniflame P
MENSI Electronic Push Button Pluse Igniter & Wire 500mm for Uniflame Patio Heaters, Gas Firepits, and Other DIY Gas Appliances

MENSI Electronic Push Button Pluse Igniter & Wire 500mm for Uniflame Patio Heaters, Gas Firepits, and Other DIY Gas Appliances

Product Code(SKU): S07J3ZAF57

Product weight: 0.50 Pounds

Brand: MENSI

Price: $12.99 (Not Confirm)

order now

product description:

  • The flame kit includes: 1 x 10 jets cast iron burner, 1 x 20psi adjustable regulator with 4 ft hose, 1 x 8" long steel manifold pipe, 1 x PTEF Sealing tape
  • The burner is made of durable material cast iron with 10 nozzles propane BTU rating: 41000 BTU
  • The regulator with hose is 4 Feet long which easy control the flame on/off and adjust the flame by thread the red knob
  • The manifold is with 3/8" NPT outlet side easy to fit in the burner without sealing tape can work well, other side can connect the standard 3/8" female flare nut on regulators
  • This burner kit can be DIY for a fireplace, fire pit, cooktop and also can easy heat anywhere when you want to heat. ATTENTION!!!: If the Nozzle Connection Leaked. ATTENTION: You may Need High Temperature Glue to Fix The nozzle on the burner in case of gas leaking from the connections.
  • ❤The "PILOT ASSEMBLY" is a part of the heat exchanger unit. This Pilot Assembly is an replacement for Rheem part number SP20824, which is used with some Rheem gas water heaters. This Pilot Assembly may be compatible with other brand gas water heaters. Like Model SP20754,SP21058.
  • ❤ Replace for RHEEM SP20824 Pilot Assembly Replacement Kit H/W - NG. But Include the LP Orifice for LP Propane Water Heaters as well.
  • ❤ The Pilot Assembly includes the components needed for a routine replacement of the unit in residential/light commercial applications which include outdoor gas-fired system. The kit supplies the following components: Pilot Kit NG, , Burner LP Orifice, Screws, Orange Outdoor Flame Arrestor with Mounting Hardware Includes: thermopiles, sparker, and pilot assembly. The part replaces Rheem part SP20824 (RE523121).
  • ❤ The part compatible for Rheem Sp20824 pilot assembly replacement kit HW is an replacement for heating equipment from Rheem. It is used in place of the old assembly indicated in this style number, and can be one of the following:The Rheem SP20824 pilot assembly replacement kit, hangswallow ignition system components; pilot gas valve, spark module with ignition pulse transformer, and flame switch.
  • ❤ Each Piece are tested with ignition and welding , leaking test. The designed head is better than the original one with higher thermo milivolt and stable to open the gas control valves. Thermopile life can be over 40000 times.
  • DIY kit suitable for all Propane & Natural Gas Gears gas appliance, grill, fireplace, stove,but you may need do some modification during installation, It not fits all the current hole for install or the length of wire,The cable length 11.8inch for the current one. (if power is not enough you can use two）
  • Output voltage: >=20kv,Sparking distance: 3-5mm, wire length 30cm, Electrode : M10*1 length: 57mm. Head with universal mounting thread.
  • No battery needed just press, one press one spark but 𝐌𝐚𝐤𝐞 𝐬𝐮𝐫𝐞 𝐲𝐨𝐮 𝐜𝐨𝐧𝐧𝐞𝐜𝐭 𝐭𝐡𝐞 𝐠𝐫𝐨𝐮𝐝 𝐰𝐢𝐫𝐞 𝐨𝐫 𝐭𝐨𝐮𝐜𝐡 𝐠𝐫𝐨𝐮𝐝𝐢𝐧𝐠 𝐩𝐨𝐢𝐧𝐭𝐬. Otherwise the spark will jump to bottom instead of top burner, Life time: Over 30000times. You may need serveral push to get a right spark.
  • Installtion Tips: VERY IMPORTANT!!! - 𝐭𝐡𝐞 𝐩𝐢𝐞𝐳𝐨 𝐢𝐠𝐧𝐢𝐭𝐞𝐫 𝐡𝐚𝐬 𝐚 𝐬𝐢𝐥𝐯𝐞𝐫 𝐬𝐢𝐧𝐠𝐥𝐞 𝐥𝐢𝐧𝐞 𝐰𝐡𝐢𝐜𝐡 𝐚𝐜𝐭 𝐚𝐬 𝐠𝐫𝐨𝐮𝐧𝐝 𝐜𝐨𝐧𝐧𝐞𝐜𝐭𝐢𝐨𝐧 𝐩𝐨𝐢𝐧𝐭. you must tough that point to a metal control pannel or add some metal to get a singnal there so you can get it correct spark. Without Connect well, The igniter cannot ignite the burner because the spark will not come from the head of electrode pin.
  • Pin straight length: 19.5mm 135degree at head 9.0mm, Wire resistance 392℉. If the kit cannot ignite the burner, please check if the body are insolated and make sure the grouding point on igniter are well connected with your metal sheet grill body. ( it cannot connect the insolated subject but need connect something conductive.
  • Low Working Pressure Max 1/2 PSI（65mbar）, CE&CSA tested Main Control Valve In & Out with 𝟑/𝟖" 𝐌𝐚𝐥𝐞 𝐅𝐥𝐚𝐫𝐞 𝐒𝐰𝐢𝐯𝐞𝐥 (𝟓/𝟖"-𝟏𝟖𝐔𝐍𝐄𝐅) thread
  • Length of Thermocoupler 600mm Head Tip M8*1 (This is Low pressure control valve max rating BTU 50000)
  • Platic Black Bakelite Knob Diameter 38mm and "D" Insert for Valve 6.0-6.1mm
  • Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater (max BTU rating: 50000 working pressure 65mbar)
  • Keep The Thermocoupler to be Heated and Push the Valve around 5-10s Then Release Hand (if Flame stops, Ajust the location of Thermocouple tip)
  • The kit includes a 12 Feet propane extension hose with 1/4 quick connect control valve and 1/4 quick plug & an quick connect elbow adapter for 17 or 22inches blackstone grill. Hose Working Temperature Range: -22°F~122°F
  • Hook up elbow adapter on your 17 /22 inches Blackstone camping grill directly by hands
  • Connect the on-off quick connect valve on hose to hook up the eblow adapter on your grill you installed in first step
  • 12 Feet hose is easily help you extend your grill from the RV.
  • Insert the 1/4| male plug into your 1/4" quick connect adapter on your RV directly. Open gas, start run your Blackstone grill with a quick connect easy take off the hose, Attention: The fitting is not screwed, You have to use wrench to screw all the connection Joints before you start running the hose
  • Thread of the nut 𝟏/𝟒"-𝟑𝟐𝐮𝐧𝐞𝐟 𝐌𝐚𝐥𝐞 𝐓𝐡𝐫𝐞𝐚𝐝 US standard threads
  • Nozzle hole 0.031" (0.8mm)
  • Replacement for bbq grill valve , burner nozzle jets
  • Pack of 10
  • Made of Solid Brass
  • Igniter and wire for Uniflame Patio Heaters and Gas Firepits 233000, 233010, GWU9209SP, GWU512A, GAD860SP, GAD920SP, GAD1200B
  • Fits several Gas firepit models from Uniflame, Endless Summer and other brands of heater and fire pit also good for DIY products
  • Length of Wire 200 degree high temperature resistance & 500mm long
  • Easy to get a spark just install an AA battery and push the red button ( need connect electrode on wire)
  • Item was approved and qualified
    • personal Info
    Disclosure of Affiliate Relationships
    • buynorthbest.com participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Since 2022, our goal has been to provide value to our visitors by carefully curating and recommending bestselling and interesting products. While we may earn a small commission from qualifying purchases made through affiliate links, this comes at no additional cost to you. Your support helps us continue offering high-quality content and product recommendations.
    • We are assuming you have read our terms and conditions and agreed with them.

    Famous Brands 2025:

    Was this product Helpful?

    Yes No