Product Code(SKU): S0006GHO5R
Product Category: BISS
Product Category: BISS
Product weight: 7.30 Pounds
Brand: Posi Lock Puller
This Posi Lock 106 manual puller has a 10-ton pulling capacity; has three jaws for equal load distribution, secure hold, and concentric pulling action; and is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. Its jaws are made of forged steel for increased strength over investment casting, and are tapered for better access in tight spaces. The center bolt has a 0.62" (15.8 mm) diameter. The diameter of the center bolt must be at least half the diameter of the shaft along which the object is pulled. This puller has a 6" (152 mm) reach and a spread range of 0.5 to 7 inches (13 to 178 mm) for increased pulling leverage. This manual puller is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others.
| Specifications | |
|---|---|
| Puller | 3-jaw |
| Pulling capacity | 10 tons |
| Center bolt diameter | 0.62" (15.8 mm) |
| Reach | 6" (152 mm) |
| Spread range | 0.5 to 7 inches (13 to 178 mm) |
| Maximum torque | 130 ft-lb. (176 N-m) |
| Hex socket size | 0.75" (19 mm) |
| Overall length | 13.32" (338.3 mm) |
| Jaw width | 0.75" (19 mm) |
| Weight | 8 lb. (3.6 kg) |
Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts—the center bolt, gripping jaws, and T-handle—and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.
Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.
