Product Code(SKU): S077GFIEQC
Product weight: 1.74 Pounds
Brand: ZHCSolar
This is a new intelligent 50a Solar Charge Controller which can handle max 100V input power and has a 12V/24V/36V/48V auto Identification system.
Note: User Manual is available for Download on this Page
During the installation and usage, please make sure to obey the following safety regulations and notices to avoid the damage to the controller.
1.Get the tools and cables ready.use an appropriate cable to ensure that the current density is less than <6A/ mm, which is conducive to reduce the cable voltage damage.
2.Temperature increases when components work.Please install the controller on the flat, well-ventilated environment.
3.In the process of wiring, please connect the battery first (ensure the correct identification of the battery voltage level), then connect the solar panel.After the controller completes the battery voltage lever identification, manually close the load output of the controller and connect the controller at last.
4.For safety reasons, do not use solar panels that exceed the rated current of the solar controller; do not connect the load overcurrent; do not use AC / DC switching power supply instead of solar panels to connect the controller.
Note for Charging Lithium Batteries:
1.When using a lithium battery in the environment below 32℉, your lithium battery must have a low-temperature working function.
2.The Solar controllers do not have the equalizing function for the lithium battery.So, the lithium battery must have a built-in voltage equalizing function.
3.Please connect the controller in the right order, otherwise, damage may occur
4.When removing the cables, please in the reverse order.
Technical Parameters
Rated Current:50A
Input Voltage:≤100V
Max wire size: 5AWG
